HOME
Fold width 800-1250mm
Shuttle number 6pcs
Weft insertion (max.) 840ppm
Qty Description
1 Main machine
42 sets of heddle belt + heddle wire, 24 of heddle wires stations in each group, totaling 1008pcs.
Rolling reed structure is beneficial to the oil-free fabric, enhances the film coating effect, and meets the requirements of food-grade products.
The main motor is Siemens variable frequency drive.
With automatic refueling cup, you can set the refueling time and fueling amount on the control screen.
6 Shuttle
The shuttle is equipped with an automatic weft yarn tension control device.
The shuttle is equipped with front and back Block yarn plate, Max.can loading 110mm diameters weft yarn.
1 Circular loom control system
Circular loom central computer control system can be used
? Adjust the weft density
? Set the length of the Fabric
? Order order
? Manually operate the lifting system without turning it on and provide the following device parameter indications:
4 file automatic meter
Run time calculation
Change roll / cloth roll indication
? Equipment Evaluation System
The module determines the following additional parameters for each class and evaluates:
Running time of the device
The number of warp yarn breaks
Number of weft yarn breaks
Frequency of weft yarn use up
The weft yarn can be precisely adjusted in the open/stop state to optimize the fabric surface effect.
The above instructions are available in two languages (English/Chinese), with metric or imperial (inch) systems
2 Creel
2 creels total 1056 stations
The creel is designed according to the warp yarn spindle and can be loaded with a spindle with a diameter of 160mm.
Note: Not include Bobbin
1 Electrical configuration
? Lighting device
Equipment is equipped with 2 sets of 18W LED lighting tubes
? Heat sink
Not Equipped cooling fan in Tension frame.
But the fan interface and switch are reserved in the control cabinet.
? Let-off system
A total of 2 feed rollers, ensure that the warp yarns are smoothly fed into the main machine and maintain the real-time tension average.
Each let-off motor is controlled by load cell + Inverter control let-off motor. Motor power 0.2KW.
? Take-up system
Weft density is set by the circular loom main control system.
Take-up motor 0.55 KW power driven by a frequency converter.
? Central drive system
The inverter controls the three-phase motor and drives the CAM through the v-belt(two-stage of drive) to turn the CAM and drive the shuttle.
Main motor power is 4 KW
? Weft yarn detection
It is equipped with a photoelectric sensor and a proximity switch to control the weft yarn together and stop automatically when the weft yarn used up.
It is recommended to use black bobbin for best effect.
Remarks: Please use light colored tube for black yarn!
? Warp yarn break detection system
Each warp yarn is length compensated by tension adjuster and automatically stops the machine when yarn breaks.
The warp yarn breakage has an indicator light, and the 3 groups of indicator lights are distributed around the equipment.
? Weft yarn break detection system
1 sets of magnetic sensors monitor the weft yarn. In case of broken weft yarn, it will stop the machine automatically.
? Button boxes
There are 4 sets of button boxes around the main machine for easy operation. Each control box have inching button, stop buttons and start buttons; all are Schneider brand.
1 Fabric winding device
A friction type winding device is equipped with a load cell, and the winding motor is a 1.8NM torque motor.
We offer a 3″ roll core (standard size).
Remarks: 4".6" roll core can be selected - need to be customize
1 Bobbin saving
l There is a platform on each side of the circular loom for placing the bobbin.
* according to equipment requirements
We reserve the right to modify the technical parameters due to the continuous improvement of equipment technology.
| Working width | 800-1200mm |
| No. of Warp yarns* | 1008 pcs |
| No. of shuttles | 6pcs |
| Weft insertion* | 840ppm |
| Weft density | 20-55 /10 cm |
| Bobbin internal diameter ** | 35mm |
| Bobbin length ** | 220mm |
| Warp bobbin diameter(max.) | 160mm |
| Weft bobbin diameter(max.) | 110mm |
| Winding roll diameter(max.) | 1200mm |
| size | 13000X2800X3500mm |
| weight | 2500kg |
** Please specify if any special requirements
